Water, powered by sunlight
Solar water pumps
for borewell and open well.
Borewell and open-well pumps for agriculture, sized and supplied with your solar panels and INVT controller by RS Corporation.
How it works
A complete solar pumping system.
1. Solar panels
Make the power
Jyotitech PV modules turn sunlight into electricity.
2. Solar pump controller
Runs the pump
The INVT controller drives the pump directly from solar, with hybrid AC support.
3. Submersible pump
Lifts the water
A Crompton borewell or open-well pump matched to your head and flow.
Solar water pump
100 mm stainless steel borewell pump
The Crompton 100 mm stainless steel borewell submersible pump with copper rotor is the pump end we pair most often with INVT solar pump controllers. Every wetted part is stainless steel, the motor is water filled and easy to rewind, and the in-built strainer keeps sand and particles out of the pump stages.
- Motor suitable for wide voltage, high quality insulated winding wire
- Stainless steel shaft and fasteners, copper rotor
- Thrust bearing: high quality carbon vs steel combination
- All pump parts stainless steel, 40% higher efficiency
- Hexagonal pump shaft for higher strength against radial load
- In-built strainer prevents sand and particle entry
- Negligible maintenance cost
Standard specification
| Range | 2.2 kW to 5.5 kW (2.0 HP to 7.5 HP) |
| Speed | 3000 (synchronous) |
| Total head range | Up to 405 metres |
| Discharge range | Up to 180 LPM |
| Motor | Water filled, 220 V single phase / 415 V three phase, 50 Hz AC supply |
| Bore size | 100 mm |
Where it's used
- Irrigation and drip irrigation
- Sprinkler, gardening and bungalows
- High storey buildings
- Industrial water supply schemes
Datasheet
Solar water pump
Open-well submersible monoset pump
The Crompton open-well submersible monoset with copper rotor sits directly in the well and handles clear water duties from 1 HP right up to 30 HP. High-permeability stamping lamination and an optimised motor design keep power consumption low, which matters when the system runs on a solar array.
- Stainless steel shaft, no corrosion
- Thrust bearing: carbon vs stainless steel
- Efficient motor design, optimum output with low power consumption
- High permeability steel stamping lamination for long life
- Copper rotor, water-filled motor with bronze bush
- Motor body in cast iron / stainless steel
Standard specification
| Range | 1.0 HP to 30 HP (0.75 kW to 22 kW) |
| Supply | 415 V three phase, 220 V single phase |
| Delivery pipe size | Single phase 50 to 65 mm, three phase 32 to 100 mm |
| Total head | Up to 78 metres |
| Capacity | Up to 2225 LPM |
| Liquid | Clear water |
| Rotation | Clockwise as viewed from motor end |
| Motor connection | STAR up to 7.5 HP, STAR DELTA from 10 HP and above |
| Motor body | Cast iron / stainless steel |
| Bush | Bronze |
| Motor type | Water filled |
Where it's used
- Farm and drip irrigation
- Drinking water supplies
- Sprinkler irrigation
Datasheet
Questions
Common questions.
Do you supply solar submersible pumps in Nashik?
Yes. RS Corporation in Nashik supplies Crompton solar submersible pumps, both 100 mm borewell pumps and open-well monoset pumps, to farms and businesses in Maharashtra and across India.
What is the price of a solar water pump?
Prices are not shown on the website because the price depends on the pump HP, head and the solar array. Message RS Corporation on WhatsApp at +91 77966 61999 with your bore depth and water need for a quote.
What does a complete solar pumping system for a farm include?
A solar panel array, a solar pump controller (solar pump inverter) and a submersible pump. RS Corporation supplies all three, sized together for your head and flow.
How deep can the Crompton solar borewell pump work?
The 100 mm stainless steel borewell pump has a total head of up to 405 metres and a discharge of up to 180 LPM, in the 2.2 kW to 5.5 kW (2.0 HP to 7.5 HP) range.
What HP solar pumps do you supply?
Borewell pumps from 2.0 HP to 7.5 HP, and open-well submersible monoset pumps from 1 HP to 30 HP (0.75 kW to 22 kW), sized with your solar panels and INVT controller.
Which solar pump should I choose for a borewell?
The 100 mm stainless steel Crompton borewell pump is built for borewells, with a head of up to 405 metres. Share your bore depth and water need and we will size it.
What is the open-well pump used for?
The open-well submersible monoset sits directly in the well and handles clear water from 1 HP to 30 HP for farm, drip and sprinkler irrigation and drinking water.
What do I need to run a solar pump?
A solar pump system has three parts: solar panels, a solar pump controller and a submersible pump. We supply and size all three together.
Tell us the borewell. We'll size the pump.
Share the bore depth, head and water requirement and we will match the pump, controller and solar array.